+ Reply to Thread
Results 1 to 10 of 89

Thread: Iron in water source

Hybrid View

  1. #1
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    817

    Default Re: Iron in water source

    .
    CC reading?
    .
    While BigDave is thinking, make a mental note about DE. It should work well for you in removing iron. It also is very good on an on-going basis to filter out smaller particles in sand filters. You just have to remember to add 2/3C after each backwash.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  2. #2
    Join Date
    Aug 2014
    Location
    Virginia
    Posts
    36

    Default Re: Iron in water source

    Will do.
    After 2 days and 2+ inches of rain I thought I better test all with 2006c kit.
    Currently:
    pH 7.2
    FC 1.0
    CC 0.4
    TA 50
    Ca hardness 160
    22,000 gal. 30' round IG, vinyl liner, sand filter, 1 HP pump, BBB method
    Taylor K2006c & K1000

+ Reply to Thread

Similar Threads

  1. Iron In My Water
    By Phenom300 in forum -- Subscriber Posts --
    Replies: 3
    Last Post: 08-16-2014, 08:18 PM
  2. Iron out to treat iron and tea colored water
    By Fornetti in forum --cleanup--
    Replies: 0
    Last Post: 07-02-2013, 02:56 AM
  3. Well Water very High Iron
    By meadsrm in forum Pool Chemistry for Intex-type Pools
    Replies: 2
    Last Post: 06-05-2012, 02:58 PM
  4. New Pool Owner With High Iron Manually Removing Iron
    By labdi01 in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 35
    Last Post: 06-18-2010, 02:56 PM
  5. Aerating Water to Get Rid of Iron
    By smallpooldad in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 09-27-2006, 09:59 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts