Re: Iron in water source
BigDave: Glad you're here
Yes, the HEDP is to keep the iron in solution and it sounds like that's what stcohen is describing as happening.
Do you think he needs to add more?
I saw Ben's references (quoted below) about chlorine.

Originally Posted by
PoolDoc
Clean the skimmer basket, then add 1 - 2 cal hypo tabs in to the skimmer... Don't add more than 1/2 pound per day.

Originally Posted by
PoolDoc
The problem you have is that adding chlorine to a pool full of iron tends to make staining inevitable. Ideally, you need to remove the iron BEFORE you begin chlorinating. BUT, you can't let the pool become a slime pit during this period.
All I found about pH is below. I'm wondering about raising pH to 7.8...:

Originally Posted by
PoolDoc
...adjust your pH to near 7.0 . . . but NOT lower.
26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO
Bookmarks