+ Reply to Thread
Results 1 to 10 of 34

Thread: PH levels

Hybrid View

  1. #1
    Join Date
    Jul 2013
    Location
    NJ
    Posts
    28

    Default Re: PH levels

    Thanks. I scrubbed this am and vacuumed this evening. My FC was 15 not much sun today so will see what it looks like tomorrow. The pressure wasn't very high but I backwashed anyway to be sure. I did notice the ladder in the deep end that I brushed yesterday had a lot of yellowish green on it again this afternoon so not really sure I've even killed the algae yet? Not sure how it's possible with the FC level as high as it's been the last 3 days.

  2. #2
    Join Date
    Jun 2014
    Location
    New Jersey
    Posts
    82

    Default Re: PH levels

    It could be the ladder was were the algae started and is still clinging on for dear life. Maybe you could take it out and clean it real good. Leave it out until the pool clears. That way you're taking it away from the whole equation.

    Also, search the forum about adding a small amount of DE to your sand filter to give it an extra cleaning boost.
    19.5k gal, 16x32 vinyl liner, sand filter, 1hp single speed pump, K-2006 test kit. PF=6

  3. #3
    Join Date
    Jul 2013
    Location
    NJ
    Posts
    28

    Default Re: PH levels

    Looked good went I got home tonight will see what happens tomorrow.

  4. #4
    Join Date
    Jun 2014
    Location
    New Jersey
    Posts
    82

    Default Re: PH levels

    19.5k gal, 16x32 vinyl liner, sand filter, 1hp single speed pump, K-2006 test kit. PF=6

  5. #5
    Join Date
    Jul 2013
    Location
    NJ
    Posts
    28

    Default Re: PH levels

    Good news is the pool is clear and looks good no dark spots. Bad news I still notice settlement. I vacuumed and back washed yesterday. I checked again today by brushing and it's less but still have the settlement. Do I still have a algae problem?

    FC 7.5
    CC0
    CYA 45
    PH 8.0

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  7. #7
    Join Date
    Jul 2013
    Location
    NJ
    Posts
    28

    Default Re: PH levels

    Ok. It was 6.8 FC and 0 cc tonight. Will see what happens tomorrow in the am.

+ Reply to Thread

Similar Threads

  1. cya and other levels
    By dalejanus in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 06-11-2012, 11:25 AM
  2. Can't get CYA levels up
    By astargel in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 08-04-2010, 04:40 PM
  3. My levels, are they okay?
    By Digger in forum Using Chlorine and Chlorinating Chemicals
    Replies: 4
    Last Post: 07-20-2010, 01:23 PM
  4. CA levels
    By wilcfr in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 07-10-2008, 11:07 PM
  5. pH levels and SWG
    By keastman in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 04-29-2006, 12:06 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts