Finished renovation first test numbers are in!

[okcnewbie]

I've added 8lbs of CYA 96% from Walmart.

I'm still running my pump 24/7. I just completed a fairly major liner install on my pool. I replaced the return lines that were leaking but I'm not sure if the suction leak is gone or not. I did find that the skimmer faceplate wasn't installed correctly by the previous installer. I'm hoping that repairing that may have taken care of the suction side. If so than my pool will be " as good as new ". After 4 or 5 days pass I plan to leave the pump off over night to see if I'm losing water or not.

I did forget to tell you that when I added the DE without mixing it with water some of it ended up in the pool later. I vacuumed it and it doesn't seem to be coming back into the pool now. I know my sand has to be at least 6-8 years old. The pool water is at about a 9.5 out of 10 for clarity. (just leaving room for improvement even though it may not be possible.)

ps. I saw that cat in the pool picture and about died laughing.

[Watermom]

Sand doesn't wear out so yours is fine. Many people have their sand for many more years than 6-8. Sometimes you have to top it off some though. 8 lbs. of CYA should be just right.

[okcnewbie]

I've been adding about 1/2 gallon 8.25% a day. I suppose that means I'm losing about 2ppm a day.

FC 4.5
PH 7.8-8
YA 150 ish from previous measurement
CYA 45 ish from previous measurement

I wonder if I'm going to have problems with my PH bouncing around. I'll just monitor for now I guess.