Of course!

The pool has been up for about 48 hr. I bought a pool starter kit from the pool store. It came with two 1lb bags of dichlor granules or "Chlore Brite". The instruction for a new pool were 1 ounce per 500 gallons of water. I used the 1 whole 1lb bag (my pool holds 9400 gallons). Then I ran my pump for 12 hrs per the instructions. I am supposed to use 1 pint of algecide now but I haven't done that. All I've put in was the 1 lb bag of Dichlor.

I have ordered a test kit from Amazon and waiting. I did use a test strip the starter kit came with. This morning it read FC 0, pH 7.8, TA 180, TH 100.

I have not ordered any tricolor tabs yet!

This is a pro series 20 x 48 pool with a through the wall skimmer. The pump is listed as F2000C And uses a type C filter.

Thanks for any help!