Results 1 to 9 of 9

Thread: PS233 test kit and CYA test question

Threaded View

  1. 04-04-2006 08:47 PM #4
    DavidD
    DavidD is offline Registered+ Weir Watcher DavidD 1 star
    Join Date
    Dec 1969
    Posts
    216

    Default

    You're thinking too much.
    Fill up to the first line with pool water.
    Add CYA reagent until level of liquid (H2O+reagent) gets to top line.
    Shake then wait at least 30 seconds.
    Fill CYA test tube at waist level until black dot completely disappears while looking in from the top.
    It seems that you were doing it correctly in the begining. You may not have any CYA. What was it last year when you closed?
    Last edited by DavidD; 04-04-2006 at 08:50 PM.
    Reply With Quote Reply With Quote
« First Test Results for ThePoolFool | Bleach Calculator »

Similar Threads

  1. Old PS233 test kit -- what reagents/chemicals do I need to replace?
    By oscarlet in forum Testing and Adjusting Pool Water Chemistry
    Replies: 10
    Last Post: 07-05-2012, 03:41 AM
  2. Discrepency btw store's H20 test and PS233
    By 22wendylou in forum DPD-FAS based testing
    Replies: 1
    Last Post: 07-10-2010, 11:23 PM
  3. PS233 test (1st this year)
    By cvoytek in forum DPD-FAS based testing
    Replies: 2
    Last Post: 05-29-2006, 11:35 AM
  4. 1st Test Results with my PS233
    By Phulish in forum DPD-FAS based testing
    Replies: 6
    Last Post: 05-25-2006, 01:12 PM
  5. CC test question
    By vanhout in forum Testing and Adjusting Pool Water Chemistry
    Replies: 5
    Last Post: 05-04-2006, 02:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules