Give us some numbers to look at and tell us what kit you used. Also, tell us what all you have added to the pool.
All,
I have recently switched to the BB method and after some frustration in getting my pool to the point where it was only losing 1ppm per night of FC, I have been consistent with my bleach usage now for a couple of weeks. One thing I have taken note of is that if I am swimming for a few hours and do not use a swim mask, my eyes are extremely blurry for a couple of hours after I get out. All of my readings (i.e. FC, CC, PH, TA, and CYA) are all in-line with what I have been taught here.
What would make my eyes this blurry?
Thanks in advance for any responses.
18' x 33' AG pool, 2HP US Motors / PMX pump with 200 # Columbia Sand Filter, (2) 4 x 20 FAFCO Solar Panels
Give us some numbers to look at and tell us what kit you used. Also, tell us what all you have added to the pool.
I have a Taylor K-2006 kit
FC = 8 to 12
PH = 7.6
TA = 80/90
CYA = 70 (This has dropped from the 90 to 100 range within 3 weeks of using the bleach in lieu of chlorine tabs)
It has rained pretty hard here over the last couple of days, so is it possible that I am getting a false CYA reading? If not, can evaporation and refilling with hose naturally deplete the CYA level this quickly? If the CYA level is correct, I was going to drop my FC down to 6 to 8.
Please advise.
Thanks!
18' x 33' AG pool, 2HP US Motors / PMX pump with 200 # Columbia Sand Filter, (2) 4 x 20 FAFCO Solar Panels
Does anyone have any thoughts on the post above?
Thanks!
18' x 33' AG pool, 2HP US Motors / PMX pump with 200 # Columbia Sand Filter, (2) 4 x 20 FAFCO Solar Panels
I didn't see anything suspicious in your numbers so I asked Ben to offer an opinion.
Bookmarks