Thank you so much, Watermom. As a matter of fact, i just start taking care of pool by myself recently, cuz I realized that professional pool guys i hired didn't do that much work(clean debris from pool and skimmer buckets, backwash) but asked for $150/month, and I dont think they even add salt or water tests regularly.
If you dont mind, i do have some extra questions for you, hope you could help me sort them out.
before questions, I think it would be better that i could list some info about my pool.
32ft x 25ft x (4.5ft ~ 8.0ft) about 24k ~ 25k gallon SWG pool with spa
most recent water test results from pool store
pH: 8.0 (have added 1 qt of gallon muriatic acid after knowing that)
FC: 0.5 (have added 56 fl oz bleach 8.25% after running 4 hrs since muriatic acid added)
Salt: 2600 ppm
CYA: 50~60ppm
TA: (cannot remember, but I believe its on okay level)
Phosphate: 800~1000 ppm
Normally, i take water sample to pool store weekly. But i feel it may have something to do with their marketing tactics, i dont remember there is one time i dont need to buy something from them. That's one of reasons I'd like to start doing water tests by myself now.
Okay, here are questions I hope you could help me with.
1. There is no reagent from my current Testkit which could provide borate level. Should I get strips for the test? I mean, pool store didn't even perform any test for that either.
2. Also, no reagent from TF100 or Taylor K2006C is provided for Salt lvl test. How often should I perform that? should I get a K1766 testkit or just go up pool store and do test monthly?
3. CYA is on the edge of requirement. I wonder if i should add some conditioner through skimmer shortly. Conditioner I got from pool store is about $40, any other alternative cheaper choices there? Also, is there anything I should be careful when adding it? I mean, someone said i have to run pump for a long time after adding conditioner since it's very thick, otherwise it may clog pump.
Again, really appreciate it your time and patience.
Bookmarks