+ Reply to Thread
Results 1 to 2 of 2

Thread: Coated, Sticky Pucks

  1. 06-30-2014 10:50 AM #1
    GaryT
    GaryT is offline Registered+ GaryT 0
    Join Date
    May 2012
    Location
    Canada
    Posts
    21

    Default Coated, Sticky Pucks

    Upon opening the chlorinator to add some trichlor pucks I found the partly spent pucks coated with a amber/yellow substance. It stuck to my fingers like tree sap and like tree sap soap would not wash it off.
    Like tree sap WD40 was needed to remove it from my hands.
    Any idea what it is? I have only used pucks and borax this season. No other chemicals.
    Reply With Quote Reply With Quote
  2. 07-01-2014 12:26 PM #2
    GaryT
    GaryT is offline Registered+ GaryT 0
    Join Date
    May 2012
    Location
    Canada
    Posts
    21

    Default Re: Coated, Sticky Pucks

    The inside of the chlorinator is also coated with this water insoluble goo.
    Any ideas as to what is causing this? Pollen?
    Reply With Quote Reply With Quote
+ Reply to Thread
« maintaining chlorine level while away | can't keep cya »

Similar Threads

  1. Need MORE info than STICKY has PLEASE on closing AGpool
    By mroll in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 16
    Last Post: 09-19-2012, 03:12 PM
  2. Setting tile over an epoxy coated bond beam
    By Bowmar in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 09-13-2011, 07:44 PM
  3. Floater pucks VS Skimmer pucks
    By ThaSatelliteGuy in forum Using Chlorine and Chlorinating Chemicals
    Replies: 8
    Last Post: 06-16-2011, 06:11 AM
  4. Suggested Sticky Topic
    By jhm in forum Using Chlorine and Chlorinating Chemicals
    Replies: 2
    Last Post: 07-10-2010, 08:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules