Re: pump for well water
We just filled our 18x33 from a shallow well at only 7' down. The one thing you may want to consider is will you be running it dry or close to the bottom if it runs too long? We have a flowing stream under ours, BUT the well was created with a vertical culvert (metal so it rusted over the years) and it still ran the water level down further than usual so crud was worked up that had been settled near the bottom at the pea rock level. We would run ours full power for 6-8 hrs at a time, pump house door open. Rust, silt and crud were issues. Multiple filters in a series (2 rust/sediment, then charcoal) as well as use of Iron Myte along with continuous filtering (alternate pump/filter units with hoses over the side) to deal with filtering out the goop the sequestering agent made of the iron content.
Beats driving to the lake!
18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr
Bookmarks