+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 18

Thread: How to Aerate for high alkalinity?

  1. #1
    csevel is offline Registered+ Thread Analyst csevel 0
    Join Date
    Mar 2006
    Location
    Cleveland, OH
    Posts
    65

    Exclamation How to Aerate for high alkalinity?

    I need to lower my alkalinity (190) I understand I need to do the muriatic acid thing...but I don't have access to a spa jet for areation and the pool water is too cold for a bunch of 10 year old boys. How should I attempt aeration?

  2. #2
    Join Date
    Dec 2004
    Location
    Indiana.
    Posts
    700

    Default Re: How to Aerate for high alkalinity?

    Quote Originally Posted by csevel
    I need to lower my alkalinity (190) I understand I need to do the muriatic acid thing...but I don't have access to a spa jet for areation and the pool water is too cold for a bunch of 10 year old boys. How should I attempt aeration?
    Point the return eyeballs toward the surface.

  3. #3
    csevel is offline Registered+ Thread Analyst csevel 0
    Join Date
    Mar 2006
    Location
    Cleveland, OH
    Posts
    65

    Default Re: How to Aerate for high alkalinity?

    There's only one return eye and the water doesn't really break the surface when I redirect it.

  4. #4
    Join Date
    Dec 2004
    Location
    IL.
    Posts
    345

    Default Re: How to Aerate for high alkalinity?

    How about getting a fitting that will screw into your return, have an elbow on it and attaching a piece of pvc pipe to direct the return flow up and out of your water, so it comes splashing back in.

    That's where I'm headed, I think

  5. #5
    Join Date
    Apr 2006
    Posts
    11

    Default Re: How to Aerate for high alkalinity?

    I used my Polaris 380. Took the bag off. Then placed it in the corner of the stairs at a slight angle so that the venturi jets also contribute with a fountain effect and it doesn't run around. The main water jet in the back works great and you can also use the 'tail' jet to aerate. Mucho bubbles. Of course, it may wind up breaking the Polaris, but mine is still working fine.

  6. #6
    Join Date
    Apr 2006
    Location
    Joliet
    Posts
    151

    Default Re: How to Aerate for high alkalinity?

    I have a light/discharge combo that shoots out the side. This return is very easy to shoot right out of the water.

    If you have a regular return, but it won't break the surface...you could try buying one of the fountain attachments.



    http://www.poolmart.com/aquaflower.htm

    dan

  7. #7
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: How to Aerate for high alkalinity?

    There's a little fountain, costs about $20, that you unscrew the eyeball and screw the fountain into the return instead. It can spray water about 10' up and 30' out. Works GREAT!
    Carl

  8. #8
    Amir is offline Registered+ Thread Analyst Amir 0
    Join Date
    Dec 2004
    Location
    Potomac, MD, USA.
    Posts
    70

    Default Re: How to Aerate for high alkalinity?

    I bought the fountain for the looks and ambiance and used it last weekend for a party. it brought down my TA by 10 to 90(I did not need the drop) in 7 hours. I have a 33000 gal pool. I hooked it up to pool cleaner and plugged the other returns using rubber freeze plugs - I don't have eyeballs - Old pool.
    Amir

  9. #9
    Join Date
    May 2006
    Posts
    24

    Default Re: How to Aerate for high alkalinity?

    You can also use a submersible pump and a short hose or just put it on the steps.
    ~25,000 Vinyl pool
    Pure and Clear SWG; Hayward Pro Series filter
    Purex Triton Minimax+ Heater; Magnatek Centurion 1 hp pump; PCS Infinity 2000 Cover

  10. #10
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: How to Aerate for high alkalinity?

    Quote Originally Posted by superjet
    You can also use a submersible pump and a short hose or just put it on the steps.
    I like that, I will probably do it sometime to see how it works.

+ Reply to Thread

Similar Threads

  1. High Ph yet Low Total Alkalinity - now what?
    By Bubbles in forum Dealing with Alkalinity and Calcium
    Replies: 7
    Last Post: 06-15-2013, 04:36 PM
  2. High CYA, High Alkalinity - everything else fine
    By distressedpool in forum Dealing with Algae & Slime
    Replies: 3
    Last Post: 08-21-2012, 04:16 PM
  3. very high alkalinity
    By rbossert in forum Dealing with Alkalinity and Calcium
    Replies: 7
    Last Post: 08-06-2012, 12:05 PM
  4. High PH and Low Alkalinity?
    By Neo Seeker in forum Dealing with Alkalinity and Calcium
    Replies: 5
    Last Post: 05-23-2012, 09:38 PM
  5. Low PH -- High Alkalinity
    By davenlu2000 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 09-25-2006, 04:21 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts