Low pH, Hardness, Alk, where do I start?
CYA 35 (finally dissolved all the stabilizer yesterday)
Hardness 40
Alk 40
pH 6.8 or under (was around 7.0 yesterday)
Chlorine: Been using bleach but have the SWCG hooked up. Just haven't turned it on yet. Today's afternoon reading is in the 3-6ppm range.
These were all measured with liquid tests, not the strips.
I have borax and baking soda. Pool is approx 5061 gallons. What should I worry about first?
16'x48" Intex, 5061 gallons, Intex 1500gph filter, Intex SWCG #54601EG, Filling with water on 6/7/14.
Bookmarks