+ Reply to Thread
Results 1 to 9 of 9

Thread: Abused pump - Now it's loud.

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    Sacramento, CA, USA.
    Posts
    123

    Default Re: Abused pump - Now it's loud.

    It's really not all that cost effective to have the bearings in a 1hp motor replaced. Most of the time you get a 90-day warranty ON THE BEARINGS only. A motor with loud bearings generally has been running hotter than designed and the windings begin to overheat. This causes deterioration of the laquer insulation and eventual failure. Most new motors come with a 1 or 2 year warranty. It's the same amount of work to remove and replace with a new one and you don't have to make a second trip to a motor or pool shop to pick up the motor when the bearing job is done.

    For the Whisperflo remember to get a new shaft seal and all the O rings when you do a replacement or repair of the motor.

  2. #2
    Join Date
    May 2006
    Location
    Berwyn, PA
    Posts
    37

    Default Re: Abused pump - Now it's loud.

    Poolman1, is it realistic for a DIYer to replace the bearings (thereby making it cost effective assuming the rest of the motor is still in good shape)?

    What tools are needed? Any online instructions on what to do? Thanks.

  3. #3
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Age
    59
    Posts
    1,765

    Default Re: Abused pump - Now it's loud.

    Darrin, sounds like the pump cavitated (the water in it boiled), hence the effluent fitting's comming off. Whatever else got melted is uncertain (I've seen pump baskets that have melted down to ~ 2.5") it's probably best to replace the whole pump as there is a fair chance that the sealing areas warped.
    Sorry I couldn't give you more optimistic advice -Waste
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

  4. #4
    Join Date
    Dec 2004
    Location
    Sacramento, CA, USA.
    Posts
    123

    Default Re: Abused pump - Now it's loud.

    If you are certain that you want to have the bearings replaced, take it to a shop that does the work. To diy you would have to buy a bearing puller and bearing driver kit, bearings, shaft seal. You also would need an impeller wrench (if you are careful, experienced or both you can get away without this) so as to not damage the impeller when you remove it. The cost of these tools will outweigh the cost of having the bearings replaced.

    You have to completely open the motor without damaging the wiring and without breaking the less than 1/8" through bolts that hold the thing together. Buy all the tools and parts and then break these and you'll need a new motor or shop anyway.

    Just a few thoughts.

  5. #5
    Join Date
    May 2006
    Posts
    13

    Default Re: Abused pump - Now it's loud.

    Thank you everone for your replies. I think I will just buy a new pump. I did notice a huge difference in my last electric bill - wow. The pump has turned into an electic hog.

    Thanks again.

+ Reply to Thread

Similar Threads

  1. Loud Pump
    By vchavez in forum In-Ground Pool Construction and Repair
    Replies: 4
    Last Post: 06-24-2009, 12:21 PM
  2. Loud Pump Noise?
    By Islander2C in forum Above-Ground Pool Construction & Repair
    Replies: 2
    Last Post: 06-15-2007, 07:39 AM
  3. Haywood Pump Loud
    By jojosail in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-25-2006, 11:00 AM
  4. HELP -- LOUD Pump
    By wrinkleigh in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-25-2006, 01:46 PM
  5. pump very loud
    By sunofthebeach in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-09-2006, 12:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts