+ Reply to Thread
Results 1 to 10 of 29

Thread: Chlorine question for Intex 22'x 52" pool

Hybrid View

  1. #1
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    Thanks Watermom . . . I guess I'll be getting some dichlor ASAP I didn't remember reading anything about that in the SS recipe. In the mean time I've added 4 doses to bleach to the pool for the evening.

    My water looks so wonderful and clear right now. I certainly don't want it to turn green.

    I'll be glad when I get all this stuff figured out.

    Thanks for the advice once again!
    Jewlz

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Chlorine question for Intex 22'x 52" pool

    The SS recipe page explains how to use the Dichlor and very importantly, what kind of Dichlor to buy. (At Sam's Club or Amazon).

    In the meantime, keep adding bleach a couple of times per day.

    And....... you are welcome!

  3. #3
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    Hello again,

    I just got my Dichlor at Sam's today and was wondering once I put a 1lb. bag in, how soon is it until you can usually get in the pool again? And while I'm asking what is a safe chlorine level? I think it says on the bag that 3ppm or under?

    Got some kids that want to possibly swim (although it looks like it could pour down rain any minute) and I don't want to throw it in there if I have to wait several hours for the chlorine level to go down or something in case they do decide to swim.

    I just checked with my tester and there is NO chlorine level at all right now even though I threw in 3 cups of bleach earlier today, and we've had no sun at all.

    Thanks,
    Julie

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Chlorine question for Intex 22'x 52" pool

    Give it a half hour to dissolve and mix in and then let them swim. Even though the bag says 3ppm and under is safe, that is not the whole story. Needed chlorine levels are based on CYA levels. The higher your CYA is, the higher your chlorine needs to be. So, if you had a high CYA level and kept your chlorine at 3ppm, it would not be safe nor sanitized because your chlorine level would be too low.

    Take a look at the Best Guess Chlorine chart in either my signature below or at this link: http://pool9.net/cl-cya/
    It explains the relationship between CYA and how high you must keep your chlorine. The fact that many people do not understand this connection causes lots of green pools!

    You are losing chlorine fast now because you don't have any CYA in the water. Dichlor adds CYA as well as chlorine so after you use it for awhile, your CYA level will build up and you'll be able to maintain a chlorine reading throughout the day. When your CYA gets to around 50ppm, you'll want to quit using dichlor and switch to just bleach so your CYA level doesn't get too high.

  5. #5
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    Thank you Watermom. I haven't even tested the CYA level yet since I don't have one yet lol! I guess once I get this in the pool I'll test it after about a 1/2 hour?

    Then according to the Ben's Best Guess chart, say if my CYA is at 20ppm, my chlorine shoudl be no less than 2 put no more than 5? Just want to make sure I'm reading it right.

    Then what does the "Shock" and +Shock+ column numbers mean?

    Thanks!
    Julie

  6. #6
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Chlorine question for Intex 22'x 52" pool

    You got it!

    Shocking a pool simply means taking your chlorine up extra high. How high you need to go depends on --- you guessed it ---- your CYA level. In most cases, if you need to shock, the number in the 'shock' column is high enough. With some types of very stubborn algae, you occasionally have to go even higher to the 'shock +' column but not typically.

  7. #7
    Join Date
    Jun 2014
    Location
    ???????????
    Posts
    18

    Default Re: Chlorine question for Intex 22'x 52" pool

    Ok another question . . . in reading the SS recipe it says that once the pool is full (and I have my dichlor now as stated above) I should "add one dose of dichlor each evening. Do NOT skip! And then add 1/2 dose before each group swims. Add borax in equal quantities as dichlor (ie, if you add 1 cup of diclor, then also add 1 cup of borax)"

    I did put in one dose yesterday and I'm getting ready to go test the water today in a minute. I've got the HTH 6 way test kit for now and I'm not sure how to test the CYA level as I don't see any instruction on the sheet that came with the kit on how to do that. Just trying to determine how much dichlor I should put in (or if I need to) and when I can get to the once a week recommendation that is on the bag?

    And is it an absolute need to get the Taylor test kit? I see it's about 3 times more expensive than the HTH kit I have and just wondering. If I really need it I will get it, but just curious as to why the HTH kit won't do for me.

    Thanks!
    Jewlz

+ Reply to Thread

Similar Threads

  1. Help. Correcting zero chlorine level & some foam in Intex type pool after dust storm
    By h20pup in forum Pool Chemicals & Pool Water Problems
    Replies: 2
    Last Post: 07-03-2013, 12:16 PM
  2. Intex pool question
    By piedmontpool in forum Pool Chemistry for Intex-type Pools
    Replies: 2
    Last Post: 07-20-2012, 09:07 PM
  3. Intex 18ft 48 deep pool question on chemicals
    By Sin2001 in forum Pool Chemistry for Intex-type Pools
    Replies: 2
    Last Post: 07-19-2012, 10:10 PM
  4. Salt Water Generator / Intex Pool Question/advice
    By Indywar in forum Pool Chemistry for Intex-type Pools
    Replies: 13
    Last Post: 07-05-2012, 02:16 PM
  5. Intex Pool 18 x 48 a general question
    By reboot530 in forum Intex-type Pool Setup & Operations
    Replies: 8
    Last Post: 06-27-2012, 05:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts