Results 1 to 10 of 13

Thread: Cal Hypo question

Threaded View

  1. 06-06-2006 07:34 PM #1
    jnorris
    jnorris is offline Registered+ Thread Analyst jnorris 0
    Join Date
    May 2006
    Location
    Florence, SC
    Posts
    72

    Default Cal Hypo question

    I need to shock my pool, and I've never done it before. I am confused on how much cal hypo to use. The directions say use 2 ounces per 1000 gallons of pool water. I estimate I have 22,000. There is a scoop inside the container, but it is not labeled as to how much the scoop contains. It looks like it is about the size of a cup of water, so can I assume it probably holds 8 ounces of granules? So if I need 44 ounces, that would be approx. 5 1/2 scoops, right?

    Also: When I add it to the skimmer, I need to have the chlorine sticks out of the chlorinator, right?

    Judy
    Last edited by jnorris; 06-06-2006 at 07:58 PM.
    Reply With Quote Reply With Quote
« How often do you shock "poll" | CYA Test »

Similar Threads

  1. Cal Hypo
    By Rickmart in forum Using Chlorine and Chlorinating Chemicals
    Replies: 6
    Last Post: 07-06-2012, 09:58 AM
  2. difference between cal hypo and sodium hypo (from bleach)
    By kasatpoolforum in forum Using Chlorine and Chlorinating Chemicals
    Replies: 1
    Last Post: 09-20-2010, 07:12 PM
  3. cal hypo and ph
    By john509 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 08-16-2010, 04:59 PM
  4. 65% Cal Hypo
    By Sherra in forum Using Chlorine and Chlorinating Chemicals
    Replies: 4
    Last Post: 09-12-2006, 01:02 PM
  5. Bleach vs Cal Hypo.
    By houston in forum Using Chlorine and Chlorinating Chemicals
    Replies: 12
    Last Post: 08-24-2006, 07:38 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules