Your numbers look pretty good. Some tweaking and you'll be perfect!

I wouldn't use any cal hypo as your CH is fine right where it is. (200-400 for your pool is fine.) Nor trichlor or dichlor since your CYA level is perfect and those two will make it go higher. Stick with bleach.

Do drop the pH a little and possibly even the TA a little. Though neither one of those is too high, you just want to be careful. High pH, TA and CH can cause scaling issues which you want to be sure to avoid.

http://pool9.net/alk-step
http://pool9.net/ma/

I would also keep your chlorine just a bit higher. http://pool9.net/cl-cya/

All in all, it looks pretty good! Great job!