+ Reply to Thread
Results 1 to 10 of 11

Thread: Testing cya with 2006

Hybrid View

  1. #1
    Join Date
    Aug 2012
    Location
    Gilbert, AZ
    Posts
    45

    Default Re: Testing cya with 2006

    This indicates that your CYA is very low. The lowest reading the K2006 kit shows is 30, so if you're filling up to that mark and you can still see the dot you need more CYA (Stabilizer). Have you recently drained & refilled your pool?
    PebbleTec | 25k Gallons | Purex Triton Whisperflo pump | Magnetek Century Centurion 1.5HP | Hayward Pro Series S311SX Sand Filter | Taylor K-2006 kit

  2. #2
    Join Date
    May 2013
    Location
    Concord,ca
    Posts
    278

    Default Re: Testing cya with 2006

    no I haven't drained and refilled. I will probably put more stabilizer in tomorrow, hoping that will work
    13000 gallon fiberglass, variable speed pump, cartridge filter, chlorine sanitized ,k-2006, also daily 5 item check ( ch, ph,ta,)
    I only trust the k-2006 titration is better for me

+ Reply to Thread

Similar Threads

  1. Neutralize ch before testing ph on 2006?????
    By dansdad in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 06-04-2013, 10:47 PM
  2. Need Help Please - just got my taylor 2006 testing kit...
    By rannrich in forum Testing and Adjusting Pool Water Chemistry
    Replies: 13
    Last Post: 07-16-2011, 03:41 PM
  3. Using the K-2006
    By Manslick in forum Testing and Adjusting Pool Water Chemistry
    Replies: 35
    Last Post: 07-07-2011, 11:31 AM
  4. Fine Tuning Testing Precedure w/ Taylor 2006
    By Gracy101 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 07-08-2006, 09:36 PM
  5. Testing chlorine with Taylor K-2006 kit?
    By AndieP in forum Testing and Adjusting Pool Water Chemistry
    Replies: 3
    Last Post: 07-07-2006, 06:15 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts