+ Reply to Thread
Results 1 to 10 of 18

Thread: My pool pump motors hate me

Hybrid View

  1. #1
    Straightleg Guest

    Default Re: My pool pump motors hate me

    Quote Originally Posted by mas985 View Post
    It doesn't matter how much water will "turnover". Pump run time should be mostly independent of turnover or flow rate.

    The reasons to run a pump and the time taken to do it:

    Chlorination/circulation - Manual dosing ~ 30 min, SWGs require more time.

    Skimming - Most skimming occurs in the first hour, after that only what falls in the pool.

    Auto Cleaner - I find only 1 hour per day is required but you may not even have one so this is not even a consideration.

    So mainly pump run time is just to get the debris out of the pool and not much more. Chlorination and circulation can happen pretty quickly.

    I have a 20k pool and run for 1 hour on high and 3 hours on low speed per day but that is mainly because I have an SWG. In terms of turnover, that is less than a 1/2 turn per day.

    You might want to read the pump run time study article in my sig.



    Thanks
    I read this once when I first joined, and forgot you had this posted.

    After reading your pump information, I set my timer to run 1 hour from 5-6am so I can clean the basket before I leave for work;
    1 hour from 3-4 pm when I get home from work.
    1 1/2 hours from 8-9:30 pm when I add my chemicals.
    3 1/2 hours a day on low speed....


    Keeping my numbers right, will see how that works out.



    Thanks
    Straightleg
    Last edited by Straightleg; 06-07-2014 at 12:39 PM.

+ Reply to Thread

Similar Threads

  1. Need Help Deciding: AO Smith Motor for Inground Pool, or Emerson US Motors?
    By hotajax in forum Pool Equipment & Operations
    Replies: 2
    Last Post: 05-30-2013, 12:35 PM
  2. Pump Motors
    By Pigseye in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-02-2012, 03:47 PM
  3. Advice on Pump Motors
    By poolboy69 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 07-13-2008, 03:56 PM
  4. Swapping pump motors
    By lmnharris in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 06-14-2006, 08:42 PM
  5. Controlling 2-speed pump motors with Aqualogic or Autopilot?
    By Beautye350 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 4
    Last Post: 04-18-2006, 06:05 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts