intial chlorine use in baquapure filtration system

[newtopools]

I purchased mine from Rec Warehouse here in Florida. So far I'm pleased. I just don't want any baqua junk. Sharon

[farmgirl]

I too have a bacquapure "water polishing" system just like yours. My problem is that i do not understand the dial adjustment system. There is a dark blue dial right in front of the chlorinator (aka "polisher") ....is there any way to tell hi from lo? I generally just leave it half way opne, so i know it is at least on "medium". LOL! I also did not know about removing the plastic grid at the bottom of the chlorinator. Thanks for that info. I have been using chlorine since the second summer i had my pool. Bacquacil was awful, and EXPENSIVE too! AND it made my skin itch!

[newtopools]

Hello Farmgirl

I used the chlorinator for the chlorine pucks to get the stabilizer up. It has stayed where it needs to be so far. This is my first year opening my pool after winter so it is still all new to me. The pool is still covered because all our trees are just comming out and they drop alot of stuff at first. The dial in front of my chlorinator has little arrows to indicate which way is open and which way is closed. Hope you have a great time with your pool. Sharon

[farmgirl]

Thanks for your response.....my chlorinator has "minimum" and "maximum" printed on it. self explanatory, right? not!!! the dial has three "prongs" on it. which one indicates the marker for setting the dial? i assume the middle one? once i determine which one it is, i'm putting red paint on it!!!! My goal is to learn half as much as most people on this forum know! LOL! Thank u for your help.

[newtopools]

Yours sounds just like mine. It is very confusing. I just turned it wide open. It took me a while to figure out the screen thing so my pucks at first lasted months and my stabilizer took a long time to build up. What type pool do you have? Do you have a 1/2 hp and 2 and a 1/2 hp. pump?

[farmgirl]

yep, sure do! 2 speed pump, everything is blue. About the "screen thing".....we are supposed to remove the grid at the bottom of the feeder, right? What about the little white tube taht is on the right hand side? I tried to move it tonight, but it would not budge! Should I just remove the grid? It has little legs that fit down into the bottom of the feeder. Am i way off base here? LOVE to figure this thing out, but the darned equipment came with NO user's instructions......rec warehouse virginia beach, va....24 ft ag round. How about yours? Bet your water is warmer than mine...you lucky Floridian!!! LOL!

[newtopools]

Yes I remember removing that grid. It's dark here so I'll go look at mine tomorrow. I can't remember that white tube you mentioned. It is hot here. In the 80's. My pool is 52" by 33'. It's great to swim in but is alot to keep clean and can be a chore covering. I know I haven't spent near as much as some I know, because I have learnt so much on this site about the BBB method. My next goal is to have a deck built. Sharon

[aylad]

I just turned it wide open.

Just be careful to keep a good eye on your CYA levels--if it's wide open it won't take very long for them to climb...

Janet