+ Reply to Thread
Results 1 to 10 of 11

Thread: OTO Testing Question

Hybrid View

  1. #1
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: OTO Testing Question

    Retested with HTH 6 way this evening.
    pH 7.4
    TA 70
    CYA 70

    Chlorine was tested straight, 1 part pool water to 1 part distilled water, and 1 part pool water to 2 parts distilled water. All 3 tests showed Chlorine to be about 4. I had my wife, the chemist verify my results.

    I'm thinking I have WAY too much chlorine in the pool. I have been adding 3 cups 8.25% bleach each evening because I'm getting a reading of 4 and the "Best Guess" says 5 minimum.

    Thanks.
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: OTO Testing Question

    I'm not the chemist so I am just making a WAG here: Your chlorine level is so high it's finally bleaching the OTO. But I do not know if that is possible. Deep brown with OTO means about 40-50ppm. But after 2 drops? I just don't know.
    Now, when you say it reads 4 when you mix 2distilled to one pool, does it read "4" on the scale? Because that means it is "12" (1:1, double the reading, 2:1, triple it and so on) If so, I'd keep increasing the dilution to 3:1 (16), 4:1(20), 5:1 (24), etc. What have you got to lose?
    Carl

+ Reply to Thread

Similar Threads

  1. Question about using titration method for testing cl levels
    By Armytiger in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 06-28-2011, 02:12 PM
  2. free chlorine testing question
    By pbotz2000 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 06-08-2010, 10:45 AM
  3. Pool store testing question
    By kevinm in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 06-21-2009, 05:05 PM
  4. PH Testing Question
    By johnnyp0_4 in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 05-08-2007, 10:53 AM
  5. Newbie here...question about testing
    By AndieP in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 07-07-2006, 09:56 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts