Help with getting pool clean

[Watermom]

Have you done an overnight chlorine test to see how much you are losing?

[tim665214]

No. I have not got exact measurements late at night. I have just been testing in the morning and adding enough chlorine to get me back to 20.

I am thinking about taking my shock level to 30. Do you think that would hurt my vinyl liner, since I have no guarantee of my cya level?

[Watermom]

I wouldn't go that high if it was my vinyl pool.

[tim665214]

I have finally got it where the pool is a dull blue color. It is also still very cloudy. But when I sweep the bottom of the pool it does not stir anything up, and it does not change the color back to green. I guess this means I am getting close to killing all the algae. But why is my pool still cloudy? Also, I noticed tonight after dark when I would shine a bright light into the water, I could see what looked like little bugs swimming up to the surface. How do I get rid of them? I have been keeping my pool at a consistent 20 ppm of chlorine.

Thanks

Tim

[Watermom]

It takes awhile for a filter to clear a pool and like I mentioned before your pump is awful big and may just be forcing debris, including dead algae, right through the sand instead of filtering it out. You might try adding a little DE to your filter. Sometimes that helps. Run your pump 24/7 while you are working to clear it.

http://www.poolforum.com/pf2/showthr...to-sand-filter

As far as the bugs, I have no suggestions. Sorry.

[BigDave]

When the food (algea, dead or alive) is gone, the bugs will be too.

[tim665214]

I am actually starting to see some progress. My cc is now less than .5. When I look at the pool I can see down about 1 ft where yesterday I could only see about 6 inches.

I took the top off of my filter today just to make sure the sand looked ok and there was no channeling. Everything looked good.

I am still needing to backwash daily right now, but when I sweep my pool nothing green gets stirred up. Hopefully I have this conquered now.