Installing a new Intex AGP with saltwater chlorination.

[tigers75]

Yes have been looking into how to disconnect the copper part.

[CarlD]

Why you add Borax and Baking soda unless your pH and T/A were low?

[tigers75]

Yes Carl, I won't initially add the Borax or baking soda until i have tested the water. Only plan on having these on hand to make adjustments. This is our first pool, so I think there will be some trial and error. Hopefully less error, so the family can enjoy the pool throughout the summer.

[Watermom]

We'll be around if you need some help while you are in the learning curve!

[tigers75]

Nice! Thanks All!

Finished leveling this afternoon. Tomorrow morning, checking leveling one final time, followed by laying down a tarp, then foam board (Gorilla tape on all seams), the pool ground cover on top of that, and then pool assembly, and finally dropping the hose in to start filling. I have been so meticulous in getting the leveled spot perfect, it almost seems to good to be true? We'll see.

Picked up all other chemicals needed in the SS Recipe, and for the BBB method of continual care! Wish me luck!

[Watermom]

Leveling is the hardest part. I have no idea how long we worked to get the area level when we put in our first pool years ago. Hope the rest is smooth sailing for you.

[tigers75]

Have started to fill and after testing out water flow rate into a 5 gallon bucket, guessing 9 hrs to fill (+ or -). Have added the 2 doses of bleach. Plan on filling tonight, shutting water off before bed time and if not to late, may get the 110 lbs of pool salt into the pool tonight also. That brings up my next questions for tonight: I will start up filter pump and get things circulating (will wait to turn on SWCG until salt is completely dissolved).......do I add anything else tonight? I read that in the "CARE" section/recipe, to add dichlor and equal parts Borax together each evening. Do I officially start adding those tonight?

Thanks for the advice everyone! Did the bucket test (5 gallon bucket with 1/4 cup bleach) and water was clear as can be, so no initial issues I believe in water quality.

[larrylintz]

Hey Tiger, or anyone, how do you disconnect it?

[FormerBromineUser]

Not sure what you are asking. Can you be more specific?

[larrylintz]

Not sure what you are asking. Can you be more specific?

sorry, i should have quoted the comment i was responding to. The situation is that i bought the Intex 9x18 4,500 gallon pool which came with a Krystal Clear 1200 gph Sand Filter Pump. I want to add a saltwater system, but was advised on this forum that there is a problem with the copper ionizer. Someone said it's possible to disconnect it and i was just asking someone if they found proper instructions.
While i have your attention can i seek your counsel to help me figure out which salt water pump in the link below would be compatible with the pump I already have? http://www.walmart.com/search/search...ex%20saltwater