I actually did a bit of work on your question, because it's one many ask: "What is the best pool equipment for me and my pool?". I'm going to post that info below, and also invite some of my more experienced members to join in.
I'm also going to ignore your preference for Pentair, since asking for "all Pentair" (or, "all Jandy", "all Hayward") contradicts your request for "what's recommended". There are only two reasons I know of for single sourcing all pool equipment: (1) using an electronic controller that only works with a single set of equipment or (2) allowing your builder to benefit from incentives he receives for 'single sourcing'. Otherwise, it's not a good idea, since all of the major pool equipment manufacturers have some items that are 'best of breed" and others that are real 'mangy mutts' that probably shouldn't even exist.
For example:
Pentair's TR series sand filters are the best available, and their System3 DE filter is possibly the best DE filter available; it's certainly a good one. But the Pentair System3 cartridge filter is an expensive beast that's extremely difficult and expensive to service, and is hypersensitive to allowing filter pressures to get high: doing so permanently damages the cartridges. And, Pentair's Intellichlor salt water chlorine generators are probably the worse SWCG made by a major manufacturer.
Hayward's white goods (skimmers, drains, returns) are as good, if not better than any others, and benefit from widespread parts availability. But the Hayward inline chlorinator is one of the worst, and severely restricts water flow on any pool with more than a 1/2 HP full rate pump!
And, Zodiac's (Jandy, Polaris) Polaris 180/280 cleaners are one of the best and most reliable cleaners available. Unfortunately, their salt system is reportedly not nearly so reliable . . . if not quite as bad as Pentair's.
Anyhow, here's my list of recommended equipment for in-ground pools, based on my own experiences plus 15+ years of operating the PoolForum:
________________________________________________
RECOMMENDED:
Filters
Undersized pool filters cause many, many problems. Manufacturers have caused this by drastically EXAGGERATING the capacity of their filters, courtesy of some jiggery-pokery with the NSF. I don't understand how they did this, but somehow they got the NSF to go along with the idea that filters which could only handle X gpm on commercial pools could handle 2X on IG pools and 3X gpm on AG pools.
=> Sand filter: Pentair TR series@ Pentair: TR sand filters
@ Amazon: TR40 / 140236 => 25 GPM; TR50 / 140249 => 35 GPM; TR60 / 140264 => 45 GPM; TR100 / 140210 => 70 GPM; TR140 / 140243 => 100 GPM
(GPM values in RED are corrections to bogus over-ratings by Pentair.)
=> Cartridge filters: various
=> DE filter:Pentair S7D75 - 37 GPM*
Pentair S8D110 - 53 GPM**
* Current (Jun 2018) seller (Pool Supply Warehouse) on Amazon of this model seems to be having difficulty shipping it safely.
** As of June 2018, this model is sold and shipped by Amazon.
Filter valves:
=> Under 45 GPM: Hayward SP710XALL (Hayward manual, Amazon)
=> Under 80 GPM: Hayward SP0715 (Hayward manual,Amazon)
=> Over 80 GPM: Pentair "High Flow" - (manual, Amazon)
Pump:
=> Pentair Whisperflo 2 speed
=> Pentair VS on Whisperflo wet-end (VS pumps NOT recommended for areas prone to thunderstorms, unless voltage surge protection is installed!)
=> applications needing high suction, high lift, or frequent cleaning (vacuum cart!): Hayward SuperPump
Valves:
=> 3-way valve: Jandy 4717; check valve: Jandy 7305
[Pentair valves are probably as good, and cheaper. However Jandy parts are much more available.]
[Scam warning: on Jandy type valves, pay attention to the SMALLER size number. 1.5" x 2" valves . . . are just 1.5" valves. 2 x 2.5" valves . . . are just 2" valves. Trying to use the 1.5" valve as a 2" creates a flow restriction! ]
=> Ball valve: GF Piping - full union /
=> Slide valve: Valterra (low pressure only!)
Inline tab feeder:
=> Pentair Rainbow 320
SWCG:
=> AutoPilot or Hayward Goldline, in the largest size available.
- - - (Turn it down, rather than get a smaller size!)
Heater:
=> Hayward Universal seriesNatural gas models:
- Hayward H400FDN Universal H-Series 400,000 BTU Natural Gas Pool Heater
- Hayward H350FDN Universal H-Series 350,000 BTU Natural Gas Pool Heater
- Hayward H300FDN Universal H-Series 300,000-BTU Natural Gas Pool Heater
- Hayward H250FDN Universal H-Series 250,000-BTU Natural Gas Pool Heater
- Hayward H200FDN Universal H-Series 200,000-BTU Natural Gas Pool Heater
- Hayward H150FDN Universal H-Series 150,000-BTU Natural Gas Pool Heater
Propane models:(These heaters are compact, efficient, price competitive, and only standard heater that is salt compatible. The smallest size is sufficient to WARM a residential pool, and extend the season. Actually HEATING a outdoor pool in cold weather is something few people can afford.)
- Hayward H400FDP Universal H-Series 400,000-BTU Propane Pool Heater
- Hayward H350FDP Universal H-Series 350,000-BTU Propane Pool Heater
- Hayward H300FDP Universal H-Series 300,000-BTU Propane Pool Heater
- Hayward H250FDP Universal H-Series 250,000-BTU Propane Pool Heater
- Hayward H200FDP Universal H-Series 200,000-BTU Propane Pool Heater
- Hayward H150FDP Universal H-Series 150,000-BTU Propane Pool Heater
Heat pump:
=> No recommendation (I don't have enough info.)
Pool cleaner:
=> Zodiac Polaris 280 with booster
In-floor cleaners:
=> Not recommended. They are extremely inefficient, and tend not to remain functional more than 5 years.
Safety cover:
=> Loop-loc (my preference) or Meyco (just as durable, but less pleasant to take on/off, due to straps woven of monofilament.)
Testing:
=> Taylor K2006 (DPD-FAS)
=> Taylor K1000 (OTO)
=> AquaChek salt strips . . . but read instructions CAREFULLY!
=> Taylor K1106 (phosphate)
=> Lamotte borate strips
Replacement filter cartridges:
=> Filbur, Unicel, or OEM
________________________________________________
NOT RECOMMENDED:
- Asian made cartridges, including Intex OEM cartridges, and probably, all brands EXCEPT Filbur and Unicel.
- Asian made anything else, not part of a soft-side above ground pool.NEVER install Chinese products underground (including valves and piping) or in a hard to access location. Chinese quality control is poor: a product that is 90% defect free . . . still means 10% of installations require repair! The statistics are such that if you use a 90% product 10x on a job, there is 75% chance you'll have problems! US products are often manufactured to a 99.9% defect free state.
- Hayward inline chlorinator -- it works poorly, and restricts flow terribly
- Intellichlor. (Pentair quickly -- and with good reason -- reduced the warranty on these from 3 years, to 1!)
- Test-strips (AKA: guess-strips), except for those above. Test strips are never very accurate, but are horrendously inaccurate when testing CYA.
- Cartridge filters, unless needed to reduce water discharge. Cartridge filters are sort of the worst combination: they offer neither the high clarity of DE filters nor the ease of use and reliability of sand filters. [ Some users have challenged this. Apparently there may be some good cartridge filters in existence. ]
- Bioguard chemicals and stores -- overpriced products sold by dealers HIGHLY trained in convincing you to buy what you don't need.
- Clorox or Arm & Hammer pool chemicals. Some of their non-pool chemicals are fine.
________________________________________________
Bookmarks