Aluminum bullnose coping misaligned

[slalom]

Hi, New to the forum. replacing liner in a new home to us and found one coping joint that has become misaligned. Is there a relatively easy solution for this situation? Thanks!!

[CarlD]

Ben has to tell you how to send pictures.

I'm facing a similar problem and am using 36" quick-clamps to move them back into position. But have something to clamp it to--the way my deck is set up, and I need to put in new screws, too.

[slalom]

Yeah the picture thing didn't work. It's inground and the bullnose is incorporated into the concrete decking. There will be a 1 cm lip in the vinyl that can't be good for longevity of the liner. I imagine I will need to cut the coping and concrete and place a new segment? Yuck

[CarlD]

Sorry, I'm not familiar with how to handle the concrete.

[slalom]

How do you get rid of the restrictions so I can see if this thing works?

Thanks!!

Ned

[PoolDoc]

If you mean moderation (waiting period before your post appears), those issues were covered in the registration notice. There will be some new options coming up, however.

Regarding your coping -- if you look, you can see that the deck is formed INTO the coping. I don't know of any practical way to move or adjust that coping. If you can find a piece of matching coping somewhere, you could cut off a slice, trim it to fit, and then cement it into the gap.