OK, the pool was completely drained and it took 24 units of city water to fill the pool and spa. So far I have added 1 and 1/2 gallons of liquid chlorine and about 1/3 gallon of muratic acid. I also have the floater loaded with a few pucks. I'm using the pucks to get chlorine and more importantly the triclor so th CYA will come up to something readable. I have checked the pH before adding the muratic acid, and the pH was high, but it only took a few drops of #3 to get the test ok. That is by far the best I've had (easiest) since testing prior to the refill. So as it stands now, the chlorine is aok right now, and I think the pH is ok, but need to test after things settle down. So the plan is to monitor the chlorine and pH levels twice daily...in the am and in the pm. I figured I would wait and see how things go before I thest the CYA, becasue I assume there is none to speak of except what comes out of the pucks in the floater.

I have in stock, liquid chlorine, liquid muratic acid, tricoloro-s-.... pucks.

So what other tests should I do at this time that would be of use?