+ Reply to Thread
Results 1 to 6 of 6

Thread: Salt test with new kit - problems

  1. #1
    Join Date
    Nov 2004
    Location
    St. Peters, Missouri, USA.
    Posts
    45

    Default Salt test with new kit - problems

    Hello,
    I added 320 pounds of salt to my 13,500 fiberglass pool last night and today I tried to test it with my new kit with salt testing.

    It tested 8000 ppm - twice - I used 40 little tiny - hard to control drops to get the sample to turn and stay reddish-orange. I had the sample tube sqeaky clean each time.

    I PMed Ben about new tips - - not sure if this is my problem or not?

    The manual for my 3 year old Autoclear SWG (manf by Clear-Tech - PureandClear in FL ) said I needed 3000 ppm the SWG to operate correctly. To achieve this it stated to add 350 pounds of salt for 14,000 gallons from a starting ppm of Zero. I assume my starting point was a 0 since my pool was drained dry last fall and filled with tap water.

    Can someone please let me know if 320 pounds of salt into a 13,500 gallon pool should be closer to 3000ppm or 8000 ppm?
    Has anyone recieved new tips? Is this is the problem?

    thanks again for all the help.
    Kevin

  2. #2
    Join Date
    Dec 1969
    Location
    Severn, MD
    Posts
    48

    Default Re: Salt test with new kit - problems

    According to the bleachcalc program that a member of the forum created, 320 pounds of salt in 13,500 gallons of water will raise the ppm 2843.6. I recommend searching the forum for the program, it is VERY useful.


    Regards,

    Mark

  3. #3
    Join Date
    Nov 2004
    Location
    St. Peters, Missouri, USA.
    Posts
    45

    Default Re: Salt test with new kit - problems

    Mark,
    Thanks for the reply - I have the calculator but did not even notice the salt calc included with the bleach calc....ooooppss. I just installed it the other day and it is very cool and from what little I have used it has been right on with the calculations and the results, sorry I missed the salt calc on it.

    So the now question is what do I need to get my salt test kit to read somewhere around 3000 ppm instead of 8000ppm.

    Any ideas?

    thanks again
    Kevin

  4. #4
    Join Date
    Dec 1969
    Location
    Severn, MD
    Posts
    48

    Default Re: Salt test with new kit - problems

    Kevin,

    Take a look at this post by Ben.

    http://www.poolforum.com/pf2/showpos...7&postcount=10

    It explains the procedure Ben wants us to use to get more consistent results.

    Hope this helps.



    Regards,

    Mark

  5. #5
    Join Date
    May 2006
    Posts
    18

    Default Re: Salt test with new kit - problems

    Did Ben ever send out that email? I have had my new kit for a couple of weeks now and still have not seen any email from him regarding the new tips. I have tried the test 3 times now with unsuccessful results. Does anyone have an update on when we will get the new tips?

  6. #6
    Join Date
    Dec 1969
    Location
    Severn, MD
    Posts
    48

    Default Re: Salt test with new kit - problems

    No, I've received no responses to my emails, PMs, or posts here. Just waiting to see what happens. I saw a post on the board where someone posted Ben's response to an email. While encouraging, I am not holding my breath. It'll get here when it gets here. Luckily I have my 233 to hold me over until I get the new one.


    Regards,

    Mark

+ Reply to Thread

Similar Threads

  1. Problems with K 2006 test kit
    By True Blue in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 06-02-2011, 06:12 PM
  2. Salt Test Kit
    By DONNIE in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 11
    Last Post: 10-24-2006, 08:25 PM
  3. Test results and problems
    By Powegian in forum Testing and Adjusting Pool Water Chemistry
    Replies: 7
    Last Post: 07-23-2006, 06:57 PM
  4. Anyone having problems with Ben's salt test?
    By SoCalBoo in forum DPD-FAS based testing
    Replies: 3
    Last Post: 06-19-2006, 05:02 PM
  5. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 12:04 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts