Hello,
I added 320 pounds of salt to my 13,500 fiberglass pool last night and today I tried to test it with my new kit with salt testing.
It tested 8000 ppm - twice - I used 40 little tiny - hard to control drops to get the sample to turn and stay reddish-orange. I had the sample tube sqeaky clean each time.
I PMed Ben about new tips - - not sure if this is my problem or not?
The manual for my 3 year old Autoclear SWG (manf by Clear-Tech - PureandClear in FL ) said I needed 3000 ppm the SWG to operate correctly. To achieve this it stated to add 350 pounds of salt for 14,000 gallons from a starting ppm of Zero. I assume my starting point was a 0 since my pool was drained dry last fall and filled with tap water.
Can someone please let me know if 320 pounds of salt into a 13,500 gallon pool should be closer to 3000ppm or 8000 ppm?
Has anyone recieved new tips? Is this is the problem?
thanks again for all the help.
Kevin

Reply With Quote

Bookmarks