+ Reply to Thread
Results 1 to 10 of 15

Thread: Need reccomendation for new liner !

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Need reccomendation for new liner !

    Liners are measured in mils. The more mils, the thicker the liner. It's not like wire or metal sizes, which are backwards, anyway. 30 mils is thicker than 20. Thicker is usually better. You have what is called an "overlap liner". Not bad, not good, just a type.
    Carl

  2. #2
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

  3. #3
    Join Date
    Aug 2010
    Location
    North of Waco, Texas
    Age
    68
    Posts
    34

    Default Re: Need reccomendation for new liner !

    Thanks Watermom, I was actually hoping you would join in on this thread. I tried to find a way to send you a PM thru the website to see if you could share where you purchased your new liner last year. If you cant share that info in this forum maybe you could send me a PM with the info. I will also use the Amazon link here and see what they have, Thanks
    16X32 vinyl AG Doughboy 12,600 gal w/ deck down one side. 19" Doughboy filter, 1.5 hp Hayward pump, CircuPool RJ20 SWCG, 440 pounds salt, maintaining 30 ppm borates; CYA 60ppm.

  4. #4
    Watermom's Avatar
    Watermom is offline SuperMod Emeritus Quark Inspector Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars Watermom 4 stars
    Join Date
    Dec 1969
    Location
    Charleston, WV
    Posts
    9,345

    Default Re: Need reccomendation for new liner !

    I actually ordered it through my local pool dealer. I didn't like any of the patterns they had for above ground pools, so I ended up ordering an inground liner. It was a little more costly but I decided that getting a pattern I liked was worth it.

    The liner I had previously was one that I ordered online. I will look and see if I can find where I ordered it or at least what brand it was. If I can, I'll update this thread.

    (By the way, the PM feature on the forum is not working.)

  5. #5
    Join Date
    Jun 2011
    Location
    Fort Worth, Texas
    Posts
    16

    Default Re: Need reccomendation for new liner !

    I need to order a new one this next week....in Texas we are about 6 weeks out on 100 degrees.....

  6. #6
    Join Date
    Aug 2010
    Location
    North of Waco, Texas
    Age
    68
    Posts
    34

    Default Re: Need reccomendation for new liner !

    I live about 60 miles south of you. If we are going to 100 degrees in six weeks I'm packing and moving to the mountain's somewhere. We may start seeing 100 degrees as early as June 1st
    some years but most summers its around of the end of June before we start hovering around the century mark. I will give you with our 80% humidity it can sure feel like that much sooner! Oh got off track WERE LOOKING FOR A GOOD PLACE TO BUY A NEW LINER !!!
    16X32 vinyl AG Doughboy 12,600 gal w/ deck down one side. 19" Doughboy filter, 1.5 hp Hayward pump, CircuPool RJ20 SWCG, 440 pounds salt, maintaining 30 ppm borates; CYA 60ppm.

  7. #7
    Join Date
    Jun 2011
    Location
    Fort Worth, Texas
    Posts
    16

    Default Re: Need reccomendation for new liner !

    Hey 95 in April is possible. Close enough for my fat gut! I just need the best place to buy a new liner. I also, would like thoughts on getting a dark colored liner, to retain heat....use it earlier in the season, longer into the night during the summer and further into fall.....

    thoughts?

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts