I have an Aqualogic controller with a built SWCG controller. It has two time cycles and for 2-speed pumps, the first is for high speed and the second cycle is for low speed. A pretty good set up for 2 speed pumps and a SWCG.
Re: Two speed pumps - how to control them (timer ?)
I have an Aqualogic controller with a built SWCG controller. It has two time cycles and for 2-speed pumps, the first is for high speed and the second cycle is for low speed. A pretty good set up for 2 speed pumps and a SWCG.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Posting Permissions
Reply With Quote
Bookmarks