Bartier Disinfection Index

[smallpooldad]

Good point.

Sadly, they often maintain their pools once a week with a pool person and I'm not sure if the pool persons are trying to save money on chemicals or just not visiting enough.

That is why the results are as described. The natural tendency in Hawaii is for the poolwater to rise rather quickly to a pH of 8.0 in most pools, keeping it at 7.4-7.5 is a major undertaking, I know I do it every day.

Anyway I'm giving up on saving the world.

But I did find it interesting that as I keep my pool sooooooo clean that my eyes were irritated slightly when swimming, could not understand why. It seems that my chlorine level is a tad too high using this index. So I learnt something new and am going to adjust accordingly.

Aloha and thanks for your help.

[sailork]

DOH!!! I'd just cleared up a mustard algae problem by bringing my pH way down to 7.8 (oh yea, i'd let it creep up a bit...) This index makes it obvious why that worked and why the SWG people seem to have fewer problems with algae etc. The pH of pure saltwater is 7.0. The SWG manufacturers tell the owners to add HCL (muriatic acid) to keep the pH below 7.6 or even 7.4. Thus their pools are much more disinfected. I'll have to find a cheaper source of HCL. That should be easy here in Texas' Chemical Coast. ;-) Those trichlor pucks with their very low pH are looking a whole lot better as well!! Thanks and Aloha!

[let_her_flicker]

At the old forum, Ben talked about people successfully operating pools with a High PH, above 7.8 I do not remember the particulars of that post, but I don't get nervous when my creeps above 7.8. I do bring it back down to the 7.5 level. Maybe Ben could chime in on that when he gets the time, but I do remember it not being a big deal as compared to high CYA.

But then again, at the old forum, he also talked about running high CYA pools and only having to sanitize once a week (as long as there wasn't some event the made you have to shock your pool). It did require you to have to do the DPD test to check Cl levels and required close monitoring to insure you did not let Cl get so low that you had a algae bloom.

I am sure CarlD remembers and can contribute on the point of high PH and high CYA pools. Yes, I understand pool operating should be simple and I do not operate my pool that way, but it can be done.