Quote Originally Posted by waterbear
I look forward to your threads. I have a strong chemisty background and previous (a very long time ago!) research laboratory experience but am not a chemist and have been a serious marine aquarium hobbiest for over 30 years now. I hope that I can add something to your threads with my limited understanding of the concepts involved (although my understanding probably excedes that of the average non-technical person).
You had mentioned various ORP levels that inhibited algae and all of these were quite low relative to the 650 mV level for sanitation. Maybe the level of HOCl to inhibit algae is below that for sanitation and it is only after algae is established (and forms a biofilm) that chlorine is not effective (except at "shock" concentrations)??? Or perhaps the lower ORP levels reflect monochloramine and that virtually no HOCl is present.

I have read that monochloramine is more effective against established algae since it reacts more slowly (weakly) than HOCl so it doesn't get "used up" by the biofilm layer and is therefore able to penetrate more deeply. If you have any way of figuring out what it takes to suppress algae and to kill algae, please let me know. We know from the experience on this forum that large amounts of chlorine will kill algae, but I'd like to quantify this further in light of our knowledge of HOCl concentration.

I've posted the technical thread in the China Shop called "Pool Water Chemistry". After I get that stable, I'll post another non-technical thread to ask for real-world algae experience.

Richard