Well, you're in the right place! Here's the order I do them in, and I do it once a week.
1) Temperature
2) FC (FAS-DPD)
3) CC (FAS-DPD using the SAME solution as #2)
4) pH
5) Total Alkalinity
6*) Total Calcium Hardness (I only run this twice a summer as I have a vinyl pool. Concrete/plaster/tile, run it every week)
7) CYA/Stabilizer

Daily I test chlorine and pH with the OTO kit. Isn't there an OTO/pH kit in the K-2006C with reagent 0600? Or is it just a pH test? If you need to get an OTO kit, try to find one where the chlorine/bromine test goes to 5/10, rather than 3/6-- it will be far more useful.