+ Reply to Thread
Results 1 to 7 of 7

Thread: How much to buy for BBB

Hybrid View

  1. #1
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: How much to buy for BBB

    Since I know NOTHING about Consoleman's pool I don't have much to go on, but nefretameses is right: CYA level determines the ideal FC level.

    But frankly, since you seem really, really new to the B-B-B method and to pool ownership I didn't want to go there yet. It's going to take some geometry to get your pool's volume and depending on how odd the shape is, and how much curve there is, the calculation can get complicated. But length x width by depth can give a ball-park. If the depth changes, start by
    (1/2xLength x Width x shallow depth) + (1/2xlength x width x deep depth) =VERY rough ball-park of volume in cubic feet. Multiply THAT by 7.5 and you'll have the gallons, very, very roughly.

    And that's a place to start from.
    Carl

  2. #2
    Join Date
    Oct 2013
    Location
    Houston, TX
    Posts
    29

    Default Re: How much to buy for BBB

    Thanks for all the responses. I ordered a K-2006C yesterday using this sites link. Can't i check the pump and filter part numbers after I close? I also looked at the best guess chart for FC chlorine level to better understand what you talked about. I will start a new thread once I get all the info.

  3. #3
    Join Date
    Jun 2013
    Location
    Central Florida
    Posts
    154

    Default Re: How much to buy for BBB

    You should post the basic info about your pool in your "signature". See CarlD and my posts for examples. You don't need it immediately but the info may influence the answer you get to various questions down the road. You can edit your signature as you get more info.

    What you will need right away is size in gallons and the following Taylor test results: Free Chlorine (FC); pH; Total Alkalinity (TA); Calcium Hardness (CH) and CYA.If you don't have gallons post the shape, length, width, shallow depth and deep depth. If the shape is irregular give widest and narrowest width and length in addition to depths. Give the current method of chlorinating.

    If you can get an opportunity to visit with the current owner and get a "tour" of the equipment, how to work it, etc. even before closing, you'll have a leg up on the process. We were able to do this when we bought our house. It may make the urgency of sizing up the pool lower, especially if there is some automatic system. Maybe your realtor can set it up for you. Most homeowners want to know that the new owner will take care of their "baby".

    Not sure how far your move is, but I assumed it's still Houston or thereabouts. "South" pools have some differences from "North" pools.

    It's really not that hard. I let the automatic system run for almost 2 years when we bought our first pool house. It was not until after I started having trouble that the pool store couldn't figure out that I found this forum, figured out what was going on and changed to BBB.

    Good luck with closing.
    In-ground gunite 16 x 30 13,000 gal. Full screen enclosure. 120 sq ft. Filter cartridge, 1-1/2 HP pump. Master Pools In-floor cleaner. Taylor K-2006.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts