Electrical equipment issue

[CarlD]

John, I wish I could help but that's beyond my ken. Hopefully, some of our other members have some knowledge of this. BTW, I run my pool on regular indoor mechanical timer and have for 11 years so far.

[jdw-tx]

John, I wish I could help but that's beyond my ken. Hopefully, some of our other members have some knowledge of this. BTW, I run my pool on regular indoor mechanical timer and have for 11 years so far.

Thanks, hopefully someone will know who I need to hire. With my remotes gone I can't work anything other than the pool motor since lights, valves, blower, etc were all tied into the remote. I've seen some cheaper wireless remotes that may work with my system but I'm not sure.

Do you have your lights, blower, etc switches inside or at the equipment? I don't mind the mechanical timer at all. Even when working the remote acted up and turned the pool on and off to the point I had to disable it so I don't miss it but I need to be able to work all the other devices.

[CarlD]

My pump and SWCG are plugged into 220v twist-lock outlets at the pool, with a cutoff switch right there. The timer (for both) is in the basement. The 2 spd switch is on the back of the pump.