+ Reply to Thread
Results 1 to 10 of 41

Thread: What to do first? CYA > 200 ppm

Hybrid View

  1. #1
    Join Date
    Aug 2013
    Location
    S. California
    Posts
    26

    Default Re: What to do first? CYA > 200 ppm

    If/when I do a complete refill, should I follow PoolDoc's instructions here: http://tinyurl.com/lyu7bnr ?

    Question though: I have not been able to find any commercial bleach in the local stores with a chlorine % on the bottle. And, most of them don't come in gallon jugs anymore! So, I've been buying 96 oz jugs at a local grocery store. Label name is "VALU TIME Bleach". I tried to find an MSDS for this product online and was unseccessful.

    I did determine that one bottle of that bleach raises my FC level by one point.

    So, what I'm getting at is, what and how much chemicals do I need to have on hand for the refill? I want to be prepared.
    Last edited by PoolLizard; 09-02-2013 at 06:40 PM.
    21.5k gal IG plaster, free form, PAC-FAB Nautilus NFS-60 DE filter; Pentair IntelliFlo pump; LAARS Series One gas heater. Hayward Ultra pool cleaner. Taylor K-2006 test kit.

  2. #2
    Join Date
    Aug 2013
    Location
    S. California
    Posts
    26

    Default Re: What to do first? CYA > 200 ppm

    Well, water is flowing. Started about 15 mins ago. I talked to a Water Co rep this morning. She said it would cost between $80 to $100 to refill. I think she's a little on the low side, but at least her estimate wasn't horribly high either.
    21.5k gal IG plaster, free form, PAC-FAB Nautilus NFS-60 DE filter; Pentair IntelliFlo pump; LAARS Series One gas heater. Hayward Ultra pool cleaner. Taylor K-2006 test kit.

  3. #3
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: What to do first? CYA > 200 ppm

    Good deal.

  4. #4
    Join Date
    Aug 2013
    Location
    S. California
    Posts
    26

    Default Re: What to do first? CYA > 200 ppm

    Had some black algae spots on the bottom of the pool. Removed them with a wire brush. Refill is now in progress.
    21.5k gal IG plaster, free form, PAC-FAB Nautilus NFS-60 DE filter; Pentair IntelliFlo pump; LAARS Series One gas heater. Hayward Ultra pool cleaner. Taylor K-2006 test kit.

  5. #5
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: What to do first? CYA > 200 ppm

    Sounds good.

  6. #6
    Join Date
    Aug 2013
    Location
    S. California
    Posts
    26

    Default Re: What to do first? CYA > 200 ppm

    Pool is about 1/3rd to 1/2 full. I poured in one 96 oz jug of (?)% store bought bleach. I know, there's no CYA in the water yet, but with these high outside temps (98 at the moment, and going up), I just wanted to get at least some chlorine in the water. I swished the water all around with my pool brush.
    21.5k gal IG plaster, free form, PAC-FAB Nautilus NFS-60 DE filter; Pentair IntelliFlo pump; LAARS Series One gas heater. Hayward Ultra pool cleaner. Taylor K-2006 test kit.

  7. #7
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: What to do first? CYA > 200 ppm

    Best time to add chlorine -- ESPECIALLY on a pool with low CYA -- is in the late evening.

+ Reply to Thread

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts