Anyone using salt w/o SWG in their chlorine pool?

[Watermom]

This thread is getting ridiculously long - 58 posts already. There have been numerous people who have tagged onto this thread with their particular problem. It is usually best to start your own thread. Please wrap up any loose ends that need to be finished and then we'll close this thread soon. It is getting unmanageable and hard to keep track of who needs what, etc.

Thanks.

[drumr]

Poulboy,
That amount of salt will not affect the aluminum extrusions.

[Ozzzz]

I have a SWC so I know I need to have salt in my pool, but I am a little confused as to why people think that soft-water = salt-water.

I was always under the impression that water softeners used salt in a brine solution that backwashed the resin or media that is used to take those hard minerals out of the water to make it soft. Salt is not added to the water to make it soft, even though I have read where softeners have warnings to people that are on a low sodium diet, and I assume thats because a small amount of salt is left in the softener media after backwashing it which can get into the soft water coming out of the softener.

[SLR_65]

I think we're getting confused in terms/meanings here.

I think many are saying the water "feels" softer and slippery and is less irritating to the eyes with salt in it. This is opposed to "being" soft as in having less calcium, etc..

It's a difference of a technical term versus a descriptive term.

/Steve