Hi Guys,

Last year we had an Intex EasySet 12' pool. I followed the BBB approach from this forum and everything went very well - no major problems, no algae, etc..

Unfortunately my sister-inlaw's black labs ATE our pool last fall!!!! (and the pool toys, and the lawn furniture, and the insulation off the central ac lines!!! The puppies are no longer welcome guests . . . (and the jury is still out on whether my sister-inlaw is still welcome! <grin>))

This year I was set to buy a 16' pool, but a friend of ours gave us their 14' EasySet pool . . . they kept having algae, cloudy water, etc. last year and didn't use it much so they decided it wasn't worth the effort. I'm pretty sure it was just inattention to the water quality that was at the root of their problems last year.

They did a good job cleaning it up before storage last year - it was very clean when we got it, but I added enough bleach to bring the chlorine up to 20ppm last night and put the solar blanket on it. I bumped the chlorine high just in case any algae ickies were still lurking about. It's been cold here so we wont be swimming for a few days anyway, and I just added enough CYA to bring it up to 30ppm (used bleach calc to figure the amount) and it's currently disolving in a sock tied to the ladder so I figured with a low CYA level the bleach will dissipate fairly quickly anyway.

Well, onward to my question . . . I've been reading the discussion in this thread on adding salt to improve the water feel but there doesn't seem to be a clear target ppm. I've seen 900 to 1600 mentioned, and then 2,200 or so mentioned.

Anyone care to give a SWAG of what ppm to target? Maybe 1500 and call it good one way or the other??

Thanks for any input!

Steve