+ Reply to Thread
Results 1 to 5 of 5

Thread: Backwash - How to?

Hybrid View

  1. #1
    Join Date
    May 2006
    Posts
    4

    Default Re: Backwash - How to?

    I did everything correctly and i dont know why but clean water was coming out of the hose. I lost like 1 or 2 inches of water in the pool. Yes the pressure came back to 10 but after 5 mins it went back to 20. My pool has 20k gallons. I decided to buy a TigerShark. Will it help?

  2. #2
    Join Date
    Dec 1969
    Location
    Green Bay, WI
    Posts
    76

    Default Re: Backwash - How to?

    It should go from teh pump to the filter to the waste line. It sounds like your is just going from the pump to the waste line. Usually you have to switch a valve (while the pump is off) to backwash to get the water to flow backwards through the filter and then out to waste. And yes you do dump a pretty good amount of water backwashing the filter.

+ Reply to Thread

Similar Threads

  1. Should I backwash??
    By newpoolguy in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-25-2011, 08:59 AM
  2. How Often Backwash?
    By ThaSatelliteGuy in forum Pool Equipment & Operations
    Replies: 12
    Last Post: 06-23-2010, 01:23 PM
  3. How to backwash
    By allison in forum Pool Chemicals & Pool Water Problems
    Replies: 3
    Last Post: 07-27-2006, 05:34 PM
  4. how do i backwash
    By dawny5 in forum Above-Ground Pool Construction & Repair
    Replies: 3
    Last Post: 07-05-2006, 09:42 AM
  5. how do i backwash
    By dawny5 in forum Pool Equipment & Operations
    Replies: 0
    Last Post: 07-04-2006, 08:30 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts