+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13

Thread: Cloudy Water in Intex 16' pool

  1. #11
    Join Date
    Jul 2013
    Location
    Illinois
    Posts
    7

    Default Re: Cloudy Water in Intex 16' pool

    Hi PoolDoc,
    Here is an update on my progress =)
    Added 1/2 gal of bleach last night, water looks better today but still hazy. TC tested 5-10(dark yellow), pH 7.2, this am - was glad it held overnight. Still running pump/filter, rinsed filter again this am.
    Planning to test again this evening & add another 1/2 gallon of bleach if still cloudy.
    I may get the clarifier you suggested if not cystal clear in a couple days, thanks. I do use Amazon, but never signed up for prime may try that too =)

    Here are my other questions:

    1.) Should I use algaecide? If so is hth 3x concentrate ok?
    2.) For a maintenence dose, if my CYA is at 50 I should keep my chlorine between 3-6, going by the chart,correct? Adjusting accordingly by the amount of stabilizer I have in my pool?

  2. #12
    Join Date
    Jul 2013
    Location
    Illinois
    Posts
    7

    Default Re: Cloudy Water in Intex 16' pool

    Oh, also with a CYA level of 50 should I stick with unstabilized chlorine until that level goes down?
    THANKS A BUNCH!!!

  3. #13
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,386

    Default Re: Cloudy Water in Intex 16' pool

    1. Don't use algaecides now. None are fully compatible with chlorine; only polyquat (www.poolsolutions.com/polyquat.html) is mostly compatible.

    2. 50 ppm CYA is perfect.

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts