+ Reply to Thread
Results 1 to 8 of 8

Thread: Replacement pump suggestions?

Hybrid View

  1. #1
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Replacement pump suggestions?

    There are several options. Some pumps/motors come with a switch but a two speed timer would allow you to set the individual run time for both high and low speed. Of course that adds to the cost of the setup.

    Are you leaning towards a motor replacement or a full pump replacement?
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  2. #2
    Join Date
    Dec 1969
    Location
    .
    Posts
    5

    Default Re: Replacement pump suggestions?

    Leaning towards just replacing the motor, I found a local place that will replace the motor and seal for ~$300 parts and labor.

    However, I just stumbled across this motor... Looks promising, trying to verify it will fit properly. http://www.poolplaza.com/P-AOS-B2982T-5005.html

+ Reply to Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts