Closed Thread
Results 1 to 7 of 7

Thread: Brushing new plaster

Hybrid View

  1. #1
    JonnyG is offline Registered+ Thread Analyst JonnyG 0
    Join Date
    May 2006
    Posts
    67

    Default Re: Brushing new plaster

    Should I brush the entire plastered surface (walls & floor)? Or just the walls?

    J

  2. #2
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Brushing new plaster

    Brush all surfaces. After all, I would think the floor is the most important for smoothness.

    What I did was start at the top of the wall and brush down and out on the floor the length of the brush in one motion. Saves some time.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  3. #3
    JonnyG is offline Registered+ Thread Analyst JonnyG 0
    Join Date
    May 2006
    Posts
    67

    Default Re: Brushing new plaster

    Thank you very much - Day 1 brushing is complete - only 13 more to go.

  4. #4
    Join Date
    Dec 2004
    Location
    Fredericksburg, Virginia, USA.
    Posts
    19

    Default Re: Brushing new plaster

    When I went through the brushing last year. My poolbuilder recommended 3 times a day for the first 2 weeks and the scaled it down over the next couple of weeks. He also recommended skipping the tops of steps and/or seats 1 or 2 times a day so that they would be less slippery. We got orientation and brush at the same time they started the pool equipment. I yelled at the pool builder until he scheduled equipment startup and orientation the day after the pool was filled.

Closed Thread

Similar Threads

  1. Brown water after brushing
    By lucybfiddle in forum Pool Chemicals & Pool Water Problems
    Replies: 14
    Last Post: 07-21-2012, 10:45 PM
  2. Brushing the walls?
    By hoffmans in forum Above-Ground Pool Construction & Repair
    Replies: 7
    Last Post: 08-22-2007, 12:29 PM
  3. Brushing an IG Vinyl Pool
    By iwannapool in forum Pool Cleaning: Manual or Automatic
    Replies: 3
    Last Post: 04-19-2007, 01:40 PM
  4. CYA and brushing
    By smokeygrl in forum Testing and Adjusting Pool Water Chemistry
    Replies: 6
    Last Post: 05-17-2006, 12:07 AM
  5. Brushing new plaster
    By zelmo in forum In-Ground Pool Construction and Repair
    Replies: 8
    Last Post: 05-04-2006, 10:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts