How Chlorine works.....for newbies

[bell7272]

Thanks, and great post for those us us just learning about our new pools and water and chemistry.

I'm just starting to use Ben's kit and will now learn about the CYA you discussed. My problem is to high CL, but am lowering the SWG a little every few days until I find a balance.

Thanks again.

[CarlD]

Well done, Dave!

Two important additions:

1) Chlorine's MOST important target, even more so than algae, is fecal matter--poop. It neutralizes and renders safe the contaminants in fecal matter, the most dangerous pollutant in your pool water. Chlorine is the only sanitizer we can be sure of to neutralize these dangerous contaminants.

When contaminated drinking water is responsible for outbreaks of people getting typhoid, typhus, cholera, etc., the contaminant spreading it is INEVITABLY fecal matter.

2) Stabilizer or CYA, while absolutely necessary, is a two-edged sword. As Dave points out, you must have it to prevent rapid breakdown of chlorine, but too much can prevent chlorine from doing its job. It's very important to use the "Best Guess Table" to determine how much chlorine you need for a given level of stabilizer.

(as an aside, do NOT use stabilizer with indoor pools. Check with PoolDoc on indoor pool management rules)

[duraleigh]

Hi, again,

It is quite revealing that the first two responders to this thread give credit to the Poolsolutions test kit for the understanding they have gained about their pool water.

Folks, that is EXACTLY my source of understanding, too. I knew absolute ZERO about pool water 'til I found this site and got my kit. I have posted time and again about the value of a good test kit and Ben's is the best.

Guessing at the contents of your pool water and asking this forum to guess along with you will prolong your path to crystal clear pool water.

Besides, keeping Ben overwhelmed with Test Kit orders, prevents him from busting me for my frequently short-tempered posts!!

[gonefishin]

Thanks for the post. Being a newbie myself...I'm finding myself always looking for additional information to learn about pool and water maintenance.


I do have a question regarding chlorine and how it interacts with CYA. What is it with "unprotected" chlorine that allows it to be used up by a warm sunny day?

Also...

What is the interaction between CYA and chlorine that seems to protect and stabilize the chlorine in water?

thanks!
dan

[waterbear]

Thanks for the post. Being a newbie myself...I'm finding myself always looking for additional information to learn about pool and water maintenance.


I do have a question regarding chlorine and how it interacts with CYA. What is it with "unprotected" chlorine that allows it to be used up by a warm sunny day?

Also...

What is the interaction between CYA and chlorine that seems to protect and stabilize the chlorine in water?

thanks!
dan

Chlorine and CYA form a type of 'combined chlorine' that is very stable to UV (I believe they form chlorimides) that still has some sanitizing power and tests as FC. If I understand it right only a certain amount of the chlorine combines leaving some FC until the CYA levels get too high for the amount of FC in the water. Don't really know that much about the chemisty involved but I intend to find out now if I can. If I can find out any more info than this little bit that I have found I will post.

[waterbear]

One more thing to add about Chlorine. It's effectiveness is influence by the pH of your pool. Chlorine is only half as effective at a pH of 7.8 then at 7.2! (I will spare everybody the chemistry involved!) This is why pH and chlorine are the two paramters that need to be monitored most closely, perhaps daily, until you learn how YOUR pool operates.

Lot's of good info here, IMHO it should be rewritten into a FAQ and made into a sticky for the newbies (and as a good refresher for the more experienced members!)

[duraleigh]

Hi, again,

I'm on a roll about Chlorine this morning.

I think we could parse this thing to death and, in so doing, may very well detract from the basic info we're trying to convey.

I hope we can keep the peripheral issues at bay (or in a new thread) and let the principles of Cl use in your pool stand alone. (just for this thread)

[gonefishin]

Hi, again,

I'm on a roll about Chlorine this morning.

I think we could parse this thing to death and, in so doing, may very well detract from the basic info we're trying to convey.

I hope we can keep the peripheral issues at bay (or in a new thread) and let the principles of Cl use in your pool stand alone. (just for this thread)

Thanks for starting the thread...and I do understand that you don't want to go to far off course ...for newbies sake

But I couldn't be any more of a newbie if I tried. I have my first pool this year and have no experience with any of this stuff. This forum should really get more credit for teaching us newbies about water management rather than chemical dispensing.

thanks,
dan

[SS 396]

One more thing to add about Chlorine. It's effectiveness is influence by the pH of your pool. Chlorine is only half as effective at a pH of 7.8 then at 7.2!

Okay, I checked my pool tonight and have the kit shown below which said I was high on both counts . I dumped it before I took the pic, but it was high on both sides. So I want the chlorine to be high to get rid of my algae problem ( water is crystal clear) but I need to get my pH level down. What am I to do/use to bring that level down?

[waterbear]

If your chlorine readings are high (dark yellow to orange) then your pH readings are bogus. High clorine readings will interfere with the pH test and cause it to read as very high pH even though it is acutally much lower. Wait until your chlorine readings are in normal range before trying to check the pH.