+ Reply to Thread
Results 1 to 7 of 7

Thread: PH is ok, Total alk is high

  1. #1
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default PH is ok, Total alk is high

    Chlorine is 5 (I shocked earlier today, last bag before I go to bleach )
    PH is 7.5
    Total alk is 230
    Total Hardness is 300
    CYA is 60

    How do I get the TA down without messing up the PH? I have some PH minus, and it is to be used to lower both. Pool water is clear, and there are no issues at all. I have a sand filter, heater, and N2 system in that order. These results are obtained using a 5 way test kit from walmart, drop style.

    Thanks a bunch.

  2. #2
    Join Date
    Dec 1969
    Location
    Katy, TX
    Posts
    336

    Default Re: PH is ok, Total alk is high

    Everything you need to know about fixing your alk is right here:

    http://www.poolforum.com/pf2/showthread.php?t=191



    Michael

  3. #3
    ScottS is offline Registered+ Thread Analyst ScottS 0
    Join Date
    Dec 1969
    Location
    Covington, LA.
    Posts
    104

    Default Re: PH is ok, Total alk is high

    Quote Originally Posted by mwsmith2
    Everything you need to know about fixing your alk is right here:

    http://www.poolforum.com/pf2/showthread.php?t=191



    Michael
    Dern, you're quick Michael I was just about to provide that info

    Anyway there you go sevver, good luck with it.

  4. #4
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: PH is ok, Total alk is high

    Yes, I just found that after I posted it, I am on it. Thanks, and sorry for not searching first, rookie BS.

  5. #5
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: PH is ok, Total alk is high

    ok, so new results after following orders.
    Chlorine is 4
    PH is 7.2
    TA is 190
    did not test the rest, this all occured after about two hours. I will continue this trend over the next couple of days.
    I gather that the PH will rise naturally as the pool gets used? As this happens I should continue to lower it, thus lowering the TA until it is in range, then allow the PH to stabilize correct? What fun! lol I am glad to see that it is working.

  6. #6
    Join Date
    Dec 1969
    Location
    Katy, TX
    Posts
    336

    Default Re: PH is ok, Total alk is high

    Yup. The idea is that areation of the water releases the co2 formed by the acid's reaction with the alk in the water. That will raise your pH, to which you can add more acid to drop the alk further if you so desire. It just takes some time, so you'll have to be patient.

    Michael

  7. #7
    Join Date
    May 2006
    Location
    Morris, IL
    Posts
    354

    Default Re: PH is ok, Total alk is high

    I also have a lighted pool jet, which shoots sideways, and I have it turned up on the angle to blow the water causing spashing and ripples which could areate the water I believe.
    The wife was out there and almost fell asleep listening to it, I may talk her into the pond yet. I really want a pond.

+ Reply to Thread

Similar Threads

  1. High Ph yet Low Total Alkalinity - now what?
    By Bubbles in forum Dealing with Alkalinity and Calcium
    Replies: 7
    Last Post: 06-15-2013, 04:36 PM
  2. new liner, well water filled, rust stains + high total alkalinity
    By sspine in forum Dealing with Stains & Metals, . . . and 'Minerals' & 'Ions',
    Replies: 3
    Last Post: 03-14-2012, 02:17 PM
  3. Total Alkalinity and Adjusted Total Alkalinity
    By cheshamjim in forum Dealing with Alkalinity and Calcium
    Replies: 2
    Last Post: 06-18-2006, 08:36 PM
  4. Total alkalinity high and pH drifting up...can someone explain?
    By Henrys514 in forum Dealing with Alkalinity and Calcium
    Replies: 4
    Last Post: 06-13-2006, 08:46 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts