High CH but no problems with pool is lowering CH necessary?
Hi,
I'm back from last year and tested this seasons water with a net gain of 300 ppm CH. My pool shows no problems whatsoever, the water is pristine sparkling blue. Should I be concerned with high CH before it spirals out of control into scaling problems? My pool is 20k gal plaster with SWCG, and cartridge filter.
FC: 10
CC: 0
pH: 7.6
TA: 120
CH: 900
CYA: 110
Salt: 3400
Should I proceed to lime softening when the pool looks fine? I would have to also purchase a vacuuming device, currently only have an automatic creepy crawly.
20,000 gal Plaster - Hayward Swimpure with 40k+ Cell
1.5 hp Whisperflo pump - Cartridge filter
Bookmarks