We are ready to have our new pool pavers sealed and have been told that you can spray the sealer on with a typical bug sprayer from Lowes, HD, etc. Someone else has suggested using a paint roller to apply the sealer because it will last 5-7 years and be a much better seal.

Does anyone have experience with sealing pavers with the roller method and is there any down side? Obviously it goes on much thicker with a roller and I'm not sure if it might dry cloudy. I've already tried testing the roller method in a small area out of site, but it hard to tell from the sample area.

I should also say we bought sealer from a paver company that is top of the line as opposed to a general sealer from Lowes, Home Depot, etc.


Thanks for any input.

W. Bell
Orlando, FL