membership upgraded.
membership upgraded.
I love this thread. OP has already figured out that chlorine is chlorine an is questioning assumptions.
12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16
All I can say is I use the calculator and place 12% in the bleach spot as I use ch. No problem though, Yesterday my 2006 said add 3.5 cups of 12% and 1.2 cups muriatic acid. I did and today my pool is sparkling. I cannot use the bleach calculator but since I cannot trust cheap brands anyway I'll just stick with what I get from the pool store. BTW can a chlorine granular be used if it is put in water first? I have a fiberglass pool and don't want a floater.....Thanks again Dave
I have been using super cheap 6% bleach from Aldi for years. I have tested it and followed its effect on my pool by testing the pool. It is 6%. Exactly as advertised. No need to get more complicated or more expensive. I don't try to keep any over winter though.
33,000ish gallon, 20X40 IG Vinyl Liner, no heater. Full sun, Sand filter. Been pool stored more times than I can count, not anymore! Thanks PF!
20'x40' rectangle 33K gal IG pool; Bleach; Hayward sand filter; AO Smith 1HP pump; 14hrs; Taylor K2006; utility water; summer: ; winter: ; iPhone; PF:3.6
Bookmarks