Results 1 to 7 of 7

Thread: Motor size?

Threaded View

  1. 06-02-2013 07:24 PM #3
    Themadczar
    Themadczar is offline Subscriber Thread Analyst Themadczar 0
    Join Date
    May 2013
    Location
    Northwest Indiana
    Posts
    116

    Default Re: Motor size?

    The motor siezed this afternoon... I have it apart but still nothing to indicate hp. Impeller is model sp4007c.

    New development! It appears that the pump is actually a Northstar. The motor must have been replaced by the previous owner, and I got Super Pump from the motor label. So the pump model is sp4020ns. It appears that this requires a 2hp pump... Can anyone confirm that for me?
    Last edited by Themadczar; 06-02-2013 at 08:37 PM.
    -Eric B. 16x32 rect 14,364 gal AG (Intex Ultra Frame); 14 in sand filter; 1 HP 2800 GPH pump; 8 hrs; Taylor K-2006c, utility water, debris cover
    @Best Guess chart http://pool9.net/cl-cya @K2006 http://pool9.net/testkits
    Reply With Quote Reply With Quote
« Above Ground Solar Blanket Reel | Hayward DE Filter Blew top of Air Release valve off?????? »

Similar Threads

  1. Replace motor or pump and motor?
    By myLABSpool in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-25-2013, 01:13 PM
  2. One motor primes pump another motor wont????
    By jmurch in forum --cleanup--
    Replies: 1
    Last Post: 12-17-2012, 10:47 AM
  3. Replace motor or motor& pump?
    By jtcaputo in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 09-08-2012, 07:27 PM
  4. Can an Aquabot Drive Motor A4510A Be Used In Place of an Aquabot Drive Motor A4510T?
    By mitachoo in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 07-20-2011, 10:04 PM
  5. What size is to big?
    By mohawk in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-11-2006, 06:47 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules