+ Reply to Thread
Results 1 to 3 of 3

Thread: Tons of air bubbles in the return!!

Hybrid View

  1. #1
    Join Date
    Jun 2012
    Location
    Texas
    Posts
    6

    Default Tons of air bubbles in the return!!

    I installed a new Intex 2650 pump with sand filter on my pool yesterday. So far this has been a huge upgrade to what I had before and is making a huge difference.

    I am having a problem with a ton of what appears to be air bubbles coming out of the return line. The bubbles disappear quickly and are not a huge problem but I would like to make sure I haven't made a mistake or am having a problem that I do not know about.

    I installed this on a Summer Escape(I think) that is 20x48. This pool has the skimmer that is attached and I just ran my intake through the old pump(unplugged). I am getting good pressure and it is moving water very well.
    20' round 8.8K gal Intex AG vinyl pool; Intex saltwater generator; cartridge filter; pump; hrs; Local pool supply company; City;PF:14

  2. #2
    mas985's Avatar
    mas985 is offline Lifetime Member Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,423

    Default Re: Tons of air bubbles in the return!!

    Quote Originally Posted by jcowar32 View Post
    So far this has been a huge upgrade to what I had before and is making a huge difference.
    Exactly what do you mean by this?

    If the pump is bigger and flow rates are higher, check the skimmer to make sure it isn't sucking any air.

    Is there air in the pump basket too?

    Does it only occur on start up?

    Do you have solar installed?

    Is the equipment installed above or below water level?
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  3. #3
    Join Date
    Jun 2012
    Location
    Texas
    Posts
    6

    Default Re: Tons of air bubbles in the return!!

    I think I found the problem. When I was hooking up the pump, because of the pre-existing plumbing, apparently I installed the plunger valve in the wrong direction. I believe this was causing the vacuum release valve to suck in a lot of air. I am currently bypassing the plunger valve until I can get some plumbing parts to correct this.

    Exactly what do you mean by this?
    The new pump is moving a lot more water than the original pump and this is helping keep the pool cleaner. Also when vacuuming it actually sucks up whatever I go over the first time.

    Is there air in the pump basket too?
    There was air at the top of the pump basket but now that is gone.

    If the pump is bigger and flow rates are higher, check the skimmer to make sure it isn't sucking any air.
    This skimmer is staying full and is not sucking any air.

    Does it only occur on start up?
    It happened all of the time.

    Do you have solar installed?
    No

    Is the equipment installed above or below water level?
    Below
    20' round 8.8K gal Intex AG vinyl pool; Intex saltwater generator; cartridge filter; pump; hrs; Local pool supply company; City;PF:14

+ Reply to Thread

Similar Threads

  1. Air Bubbles in Return Lines
    By dnspade in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 05-25-2011, 02:05 PM
  2. Bubbles in Return & Low Pressure
    By handy1 in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 08-08-2010, 08:58 PM
  3. SWG and Bubbles from return??
    By Sardian in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 1
    Last Post: 04-28-2007, 01:05 PM
  4. Bubbles from return
    By spcchap in forum Pool Startup, Shutdown, & Winter Operation
    Replies: 5
    Last Post: 04-25-2007, 06:52 PM
  5. Air Bubbles in Return
    By rrands in forum Pool Equipment & Operations
    Replies: 1
    Last Post: 06-14-2006, 10:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts