Results 1 to 10 of 10

Thread: Tiny micro bubbles coming from returns

Threaded View

  1. 06-15-2013 09:35 AM #8
    krdowns
    krdowns is offline Subscriber krdowns 0
    Join Date
    Apr 2012
    Location
    St. Louis metro area
    Posts
    35

    Default Re: Bubbles coming from returns/pump basket not full

    So I cleaned and lubed the o-ring on the pump basket, but I am still getting air coming from somewhere. The pump basket does not stay full of water after priming. If I set the pump to the #1 setting (4 speed Pentair pump), it stopped drawing water completely and I shut it off before it went into alarm mode. Any ideas on what to check next?
    Last edited by krdowns; 06-15-2013 at 10:00 AM.
    11,700 gallon Leisure Elegance 27 fiberglass pool, Pentair Intelliflo pump, IntelliChlor IC20 ECG, UltraTemp heat pump, IntelliBrite 5g LED light, EasyTouch 4, DeckJet II, Automatic Pool Covers AutoGuard Top Track
    Reply With Quote Reply With Quote
« Ph is ideal, alkalinity is a little high | Inground gunite pool - stains on floor »

Similar Threads

  1. Vacuumed Debris is Coming Out the Returns
    By Shifty in forum Pool Equipment & Operations
    Replies: 6
    Last Post: 06-22-2012, 01:01 AM
  2. Bubbles from my returns?
    By gilbertpsk in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 2
    Last Post: 06-17-2011, 04:31 PM
  3. Tiny Bubbles
    By rickw in forum Pool Chemicals & Pool Water Problems
    Replies: 1
    Last Post: 07-17-2006, 10:31 PM
  4. Re: tiny bubbles
    By rcastorani in forum Using Chlorine and Chlorinating Chemicals
    Replies: 3
    Last Post: 06-21-2006, 07:55 PM
  5. CYA coming back through returns?
    By HooStat in forum Testing and Adjusting Pool Water Chemistry
    Replies: 9
    Last Post: 04-25-2006, 08:57 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Forum Rules