+ Reply to Thread
Results 1 to 3 of 3

Thread: Low salt light "ON" on my Pentair SWG

  1. #1
    Join Date
    Dec 2004
    Location
    Orlando, Florida, USA.
    Posts
    177

    Default Low salt light "ON" on my Pentair SWG

    I have the Pentair IntelliChlor SWG. The unit has been in use about 2 months now (although I bought it before my pool was dug so it is technically out of warranty). It worked fine for two months, recently the "add salt" light has been coming on. This means the chlorine will be produced at a lower rate until salt is added to the pool. The light comes on when salt level is below 2900ppm. The problem is my salt is actually at 3400ppm. I cleaned the unit (although no visible signs of scale) but the light remains on. Any idea whether this unit has a calibration mode? What should I check next?
    Thanks

  2. #2
    Join Date
    Jul 2006
    Posts
    7

    Default Re: Low salt light "ON" on my Pentair SWG

    I have attached the calibration instruction so you can have the unit running correctly.
    Attached Files

  3. #3
    Join Date
    Dec 2004
    Location
    Orlando, Florida, USA.
    Posts
    177

    Default Re: Low salt light "ON" on my Pentair SWG

    Thanks for responding. I got a copy of the calibration instructions directly from Pentair (e-mailed to me) a few weeks ago. The calibration solved the problem.
    It's good to have a Pentair rep on the forum. I have a few other Pentair questions you may be able to help with. I'll post them as a new Posting.
    Mike

+ Reply to Thread

Similar Threads

  1. Newbie just beginning to understand "free" and "total" chlorine. . .
    By Hainsworth in forum Testing and Adjusting Pool Water Chemistry
    Replies: 14
    Last Post: 06-30-2012, 10:17 AM
  2. Can a leaking Jandy "Check Valve" with clear top be "fixed"?
    By 105ex in forum Pool Equipment & Operations
    Replies: 3
    Last Post: 05-29-2010, 08:17 AM
  3. Changing AG pool depth from 52"-54" to 46"-48" for kids (shallow end tricks)
    By zephans in forum Above-Ground Pool Construction & Repair
    Replies: 9
    Last Post: 06-02-2007, 11:28 AM
  4. Aquarite "No Flow" light.
    By Number6 in forum Salt Generators (SWCG) & other Chlorine Feeders
    Replies: 9
    Last Post: 06-18-2006, 09:45 PM
  5. Esther Williams "Millenium" Pool Install "issue"
    By mrpurrhead in forum In-Ground Pool Construction and Repair
    Replies: 3
    Last Post: 06-12-2006, 10:34 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts